Top 10 Best Cabinet Hardware Jig: Reviews and Comparison Guide
Having trouble installing cabinet pulls and knobs? From one woodworker to another, let me give you a bit of advice.
Whether you are updating your kitchen cabinet or building something from scratch, don't even think about starting without the best cabinet hardware jig on the market.
Why? Because adding cabinet hardware like knobs and pulls are often the most intimidating process because you have to drill accurately and straight.
You also have to measure where to position the holes and having a hardware jig will take the guesswork out.
The best hardware jigs are designed in a way that is easy enough for beginners and at the same time robust enough for professionals to use.
Whether you are refreshing your entire room, adding hardware to new cabinets or building a DIY project, a hardware jig will make the process of adding pulls and knobs incredibly easy.
Because one of the most important job when finishing up a kitchen project is drilling for the hardware. If you make a mistake, you could end up having to remake something or end up doing a lot of filling work.
But if you use an installation jig, it will take all of the guesswork out of thanks to all of the measuring guides and drill guides that come with the tool.
5 out of 5
5 out of 5
4 out of 5
5 out of 5
4.5 out of 5
Top 10 Best Cabinet Hardware Jigs
Let’s have a look at top 10 widely used hardware jigs on the market that are used by woodworkers all over the world.
1. Kreg Tool Company KHI-PULL Cabinet Hardware Jig
The Kreg Tool Company’s cabinet jig is the king of hardware jigs. And no, I’m not making this up. This tool is backed up by a lot of professional woodworkers and for a good reason. With this one, you can accurately do all your measurement work, drill precise and straight holes, save time and effort.
What I like most about this jig are its adjustable hardened steel guides. You can use them to keep the drill bit straight while you are drilling. This will allow you to drill straight holes with high accuracy. Plus, they won’t wear out because these are hardened steel guides. They are easy to adjust by turning the grey knob from the back.
On the back of the jig, there is a moveable edge guide that you can quickly adjust by turning the black knob. You will also find the built-in measuring scales at the bottom which you can use to find the center lines. If you want professional and quality results, this is the best cabinet hardware jig for the money that you can buy.
Let’s talk about usability. You will be impressed with its user-friendly design. It is easy enough for a beginner to use and at the same time, has the features and build quality to deliver a professional result. It is robust enough for an experienced woodworker to use. And because of its sturdy build, you can use it for years.
2. The Original Cabinet Hardware Jig Tool
This cabinet hardware jig is the only tool that can rival Kreg Tool’s product. It perfect in every way. Whether you run your own remodeling company or looking for an installation tool to do your hardware installation work, this will be the only tool you will ever need. It’s also perfect for professionals that work with odd sized cabinet hardware.
It’s well made and well worth the money. If you are professional woodworker, this tool will pay for itself by saving you employee labor time. It is better than most plastic templates on the market. This installation is tough, well made, and sturdy. It will last years in the hand of a professional renovation contractor.
You can quickly drill holes in expensive cabinets thanks to the precise measurement this tool will give you. You won’t have to worry about drilling holes in the wrong place. If you are paying attention, this jig will allow you to finish those repetitive projects faster with high accuracy. You can quickly work with long pulls and other add angled knobs.
You can adjust the slider to work with handles up to 12”. It also comes with a long hardware attachment that allows you to work with hardware up to 48-inch long. Once you set this up, you don’t have to re-adjust anything because it is reversible. With this jig, you can also work on shelf pin holes and hinge plates.
3. Valiant Cabinet Hardware Jig
Precision is essential when it comes to installing knobs and pulls. And that’s why you can’t trust cheap plastic templates and jigs. The Valiant cabinet jig tool is designed for the accuracy you need in your everyday job. With this tool, you can work with high precision without going wrong. It’s a simple jig that makes the whole installation process a breeze.
Constructed from industry-grade aluminum alloy, this tool will easily outlast your mounting needs. The most important part of this jig which is the ruler is made from high-quality stainless steel. The index marks are easily readable and use metric as a unit because the drill bit was made in China.
This tool comes with a nice storage bag that you can use to keep all the attachments parts like the Allen wrench and drill bits. Accuracy isn’t a problem for this tool, but it would be much better if the sharp corners of the index were eased a little. But that doesn’t mean that it’s not usable. You only need to set this once and repeat the process.
The best part of this is that it allows you to work with a variety of hardware handle lengths. Since it is all metal parts, you won’t have to worry about it losing shape or any bending issue. And there aren’t any flimsy plastic parts, so accuracy won’t be an issue. But I don’t think it will last that long if you use it as a daily driver for a professional remodeling agency.
4. Kreg Tool Company - Cabinet Hardware & Drawer Slide Jig
Another professional cabinet installation jig from Kreg Tool Company and this time it comes with concealed hinge jig for accurate hinge positioning. They can be used with Kreg clamps, but I prefer using them with a squeeze type one-handed bar clamp because they are easy to adjust and take off.
Speaking of clamps, Kreg Tool Company has its own clamps that nicely holds hardware jig in place and have a perfect notch to grab and hold the round end. Kreg is a company that makes products to simplify the job of a woodworker. Their products are designed well and this one is no exception. It’s literally the same product jig you have already seen in this list.
However, you are getting some extra attachments and tools. These tools are great for installing cabinet doors, measuring the center mark and installing drawers. If you don’t know how to use these tools, take some time off and watch some tutorials on YouTube. Kreg even has their own channel where they talk about how to work with their tools.
The only issue would be the pricing. Most of these are plastic components but that doesn’t make them any less durable or lacks quality. But considering the material choice, they could have lowered their prices a little bit. But their products are reliable and overtime, they will pay for their self.
5. Power Tools Punch Locator, Drill Guide Sleeve Cabinet Hardware Jig
It is fast, accurate and well worth the money. If you want to mount cabinet hardware quickly, precisely and save time, this is the tool to get. It is certainly much better than measuring and drilling each cabinet and hope they are aligned perfectly. And most of the time, you will end up making a mistake.
That’s why you need to rely on a professional jig to avoid this problem. And if you are working on a set of expensive cabinets, you can’t afford to mess up the drilling procedure. And for that reason, you need an installation jig that will help you get your job done and get your hardware aligned.
It is easy to use, and you can set this one up to work with any length. Whether it’s a long handle or a pull, you don’t have to change your measurement tools or templates. Making wood templates is a time-consuming task and drilling through them isn’t always accurate.
The key to installing perfectly aligned hardware is to drill straight and precise. The drill guides of this tool will allow you to do and eliminate any sort of drilling mistake. It is their own patented design and will make sure you are drilling at the right spot every time.
6. Cabinet Hardware Jig tool for Handles and Knobs
If you want a simple best cabinet hardware jig to align all your cabinet hardware properly, this is the one. This one is very easy to use and work with. This cabinet hardware jig tool simplifies the process of measuring and drilling. With this one, you will always mount cabinet hardware with accurate measurements. If you have worked with jig tools before, you can easily work with this one.
While drilling holes, make sure to use proper clamps to hold the jig tool in place. There are three sliding drilling guides that will help you to drill precisely and straight. The hole guides are slightly larger than standard drill size, but it is nothing that a quick masking tape won’t fix.
Again, keep in mind that there are other better installation jigs out there and this one is only for those simple remodeling projects that won’t require complicated hardware installation. It’s a suitable tool for beginners that adjusts easily, works well and sturdy enough to be used for a long time. This tool comes with its own zippered case.
You can use the case to store all the attachment that comes with this tool. The sliding drill guides can be locked in place for accurate drilling. Only the metal crossbar has both English and metric measurement. You will only find metric markings on the plastic ruler bar.
7. Deluxe Drawer Pull JIG IT
It’s a simple plastic jig template that allows you to mark the screw holes for installing kitchen cabinet hardware easily. Keep in mind that it is a template and it doesn’t have all those important features like drill guides, sliders and all that. However, for quickly installing knobs and pulls, this template is a time saver.
You could save up to 70% of your time with this one. This jig allows for quick and accurate installation of drawer pulls but you would have to modify it if you want to install a 5-inch center spacing pulls. It is because this one only goes up to 4-inch centered handles. Which also means that you won’t be able to work with long handles.
You can only set this template once. To get the most out of this jig, you should only buy this when you have to install multiple drawer-pulls on drawers that have the same width. But keep in mind that you can’t work with 8-inch handles because the template is not wide enough.
If you want to make it work, you would have to do some modifications of your own. It’s an adjustable tool and once you set it up with markings and drill points, this will be only hardware jig that you will need for all of the same width drawers in your kitchen.
8. TOURACE Cabinet Hardware Jig for Handles and Knobs
This simple hardware jig from TOURACE is for those budget DIY guys that are looking for an inexpensive option. It has a durable abs plastic and aluminum alloy construction for longevity. It has three sliding drill guides as well as a 5mm drill guide. With this jig, you can precisely measure where to drill holes for your cabinet knobs.
If you are remodeling your kitchen or adding hardware to multiple cabinets, this jig will help you give a professional look to your project. Thanks to the measurement scale, it will take all of the guesswork out before you do any sort of drilling. You can verify the measurements again and check if the holes you are drilling will fit the cabinet handles.
Most woodworkers I know still use measurement tapes; you could do that, but why bother with a different tool when the measurement scale is built into this jig. It also has three drill slider guides which will guide you to drill precisely and keep the drill bit straight. The metal on the guides are sturdy and won’t wear out quickly.
This model has a plastic ruler, but I would recommend you spend a few bucks more and get the metal ruler if you plan on working with this jig for a long time. It is ideal for beginners and professional woodworkers, construction workers, and cabinet makers.
9. True Position Tools TP-1935 Cabinet Hardware Jig
For a long time, tradesmen have been using measuring tapes and creating their own jigs to do all of the hardware installations. It’s time tested method but it isn’t efficient anymore because the whole process of taking measures with a measurement tape and making your own jig is too time-consuming.
True Position Tools Company’s Original Cabinet Hardware Jig will cut that installation time by 75%. It’s an extremely well-made tool that is perfect for remodeling kitchen and working with odd sized cabinet hardware. It’s a complete hardware solution that comes with all the tools you need in one kit. This tool is simple to use and gives you accurate measurements.
As a bonus, you will also get an Allen wrench, index guides, drill bits, and TP-ERA ruler. You can use it to install cabinet hardware of all sizes and has a heavy-duty construction for professional work. Thanks to the extended ruler, measuring the center of a drawer front is quick and easy. This thing looks more like a surgical instrument than a hardware tool.
The jig is easy to adjust, and you don’t need any extra tools to do that. It’s sturdy but at the same time, lightweight. This one also comes with a rigid plastic case that you can use to store this jig and carry wherever you want. If your job requires you to install long knobs and pulls, this is the tool to get.
10. Hardware Horse Drill Jig
If you want an all-in-one solution for installing cabinet hardware of any type, this drilling jig is the one. It is pre-configured for most hardware size, and you can use this to install doors and drawers. From 352 mm drawer puller to simple knobs, you can make the most use out of it.
Using this jig is also very easy. First, determine which holes you need and use a drill for popping the hole. The holes aren’t drilled all the way through so that you can use them later on according to your projects. Insert the index pin with a single layer of tape on both sides. It also has built-in centering marks.
It will be enough to keep the pins in place and also protect the edge of the door. Once you marked the side offset and height offset, you can now start working with this jig. Simply hold the jig so that all of the index pins make contact with your drawer or door and drill. It’s made is the USA so expect great quality from the manufacturer.
Since it’s reversible, you can do everything with the same setup. This jig also allows for straight drills which eliminate the need for any additional drill guides. Upper cabinets, lower cabinets, left or right, it’s all the same for this Hardware Horse drill jig. Simple flip it over and start drilling. It doesn’t get any simpler than this.
How to Choose the Best Cabinet Hardware Jig?
If you are working on a kitchen remodeling project that is full of expensive cabinets and you need to install door and drawer pulls, you could do all of the measuring work individually and hope you get them right each time. But there is a safer and better way.
All you need is an installation jig that will let you be completely accurate and finish the job very quickly. Choosing one isn’t very hard as there aren’t that many manufacturers out there that make them.
Which also means, you only need to look at a couple of features to choose the right tool, so let’s look at them right now.
Since you will be using this tool a lot, it’s important that they are made tough. They need to be built strong so that they don’t lose shape, don’t break in the middle of a project and remains reliable for accurate measurement.
In this case, look for steel jigs. They are better than their aluminum counterpart and will also help the tool to take a lot of abuse and get through tough jobs.
Make sure the jigs you are buying have reinforced hole templates, bushings, and steel liners.
Easy to Use
You don’t have the time to mess around with a jig that’s too complicated to use. Simplicity is the key here. The jig you will buy should be able to save you time and allow you to work faster than a cheap hardware jig.
There cheaper Chinese tools out there and most of them will work, but they won’t last that long. And you will end up spending more money replacing them. And most of them don’t have a lot of features.
Which means you will have to do the measuring and prep works on your own with a different set of tools. That’s why it is important that you invest in a tool that has all the features you need to save time and make the installation process easier.
Also, keep in mind the extra features that come with the tool. Some will have center markings that will help you install cabinet handles; some are useful in drilling shelf holes others are just basic measurement jigs.
The more features you want, the higher the price will get. Don’t expect a basic tool to come with all the parts for different applications. Again, you should also consider the price.
Are you willing to pay extra for all those features? If you don’t want them, don’t pay the extra. Save money and buy some other woodworking tools instead.
How to Use A Cabinet Hardware Jig?
In this section, I’m going to talk about how you can use a cabinet hardware jig to install a drawer jig. For this tutorial, I’ll be using the Kreg Tool’s jig because it’s the best cabinet hardware jig on the market.
However, you can use different tools if you want. Now, whenever you try to install drawer pulls and knobs, most of them will only guide you to place the holes properly.
But what woodworkers mostly need is a drill bit guide One that you can use again and again because you don’t want to drill a hole holding the drill machine in an angle.
That is where this tool shines the most. Not only you get precise hole placements, but it has drill bit guides that allow drilling straight holes. And the stainless-steel guides can be used over and over again.
Here are the steps to install a drawer pull using a cabinet jig.
1. To install a drawer pull, first measure the spread. It is the distance between the holes.
2. Turn the jig over and adjust the spread. You need to loosen the gray colored knobs and slide them to the desired position you want to drill holes. This jig comes with measurement markers which you can use to adjust the horizontal spacing.
3. Now tighten the drill guides in place and make sure they are properly spaced apart and also has the same distance from the center line.
4. Adjust the height. There is a black knob on this jig. Loosen it up and adjust the height measuring from the top of the drawer.
5. Once you align the arrows perfectly, tighten the height adjustment knobs. If you haven’t already marked the center line of your drawer, do it now.
6. Recheck the measurements again to see everything is aligned perfectly. You can use a measuring tape to mark the center line.
7. Place the hardware jig on top of the drawer so that the center line meets the center marker of the jig. You can use a clamp to secure it in place.
8. It’s time to drill the drawer pull holes.
7. Now take off the clamp and remove the hardware jig. Insert the screws for the drawer pull, thread them tight so that the drawer pull gets a snug fit. And that’s how you do it.
How to Position Cabinet Pulls and Knobs?
When working with kitchen hardware, a lot of people don’t realize how many knobs and pulls they will need to install. You can have 30 or more these in a single kitchen and that involves are a lot of measurement work.
Now, I’ve already shown you how you can use a cabinet hardware jig to measure the drilling points. Now, let’s talk about the best position to drill these holes. You need to make sure that you position them in the best place.
With base cabinets, there are three options. You can put it in the center of the drawer or at the center of the rail.
To make them look evenly centered from any angle, move the drawer pull up half an inch from the center at the bottom drawer. Raise it about a quarter of an inch on the middle drawer and then put it centered at the top drawer.
Now, no matter which angle you look at the cabinet, it will look better.
When you use a proper installation jig and finish up your project, the result will be amazing. Your project will turn out better than you could have ever imagined.
With the best cabinet hardware jig, every part of the job will go smoother. From installing the doors to putting the drawers in place to finishing up drilling for the hardware, every step of the way, your job will be a lot easier.